During the processes of plastic extrusion, modification granulation and recycled plastic processing, product quality is not only determined by the raw materials and extrusion techniques, but also the gases and volatile substances produced during the production process may affect the final products.
When the materials are heated and subjected to shear force during the extrusion process, the moisture in the raw materials, residual volatile substances and some gases may be released. If these gases cannot be promptly removed, it may cause problems such as bubbles, surface defects or unstable performance in the products.
Therefore, on many plastic processing production lines, vacuum degassing has become one of the important process steps. And the vacuum pump is an important equipment for establishing and maintaining the vacuum environment required for degassing.

1. Why is vacuum degassing necessary during plastic extrusion?
Plastic extrusion is a common continuous processing method, widely used in the production of plastic pipes, sheets, films, modified plastics, and recycled plastics, among others.
During the processing, the materials may carry moisture, air, or other volatile components. Especially in the processing of some plastic modifications, recycled materials, and high-molecular materials, the gas expulsion situation can have an impact on the production process and product quality.
If the gas remains in the molten materials, it may cause the following problems:
Bubbles or voids in the products: The presence of residual gas may affect the appearance and internal structure of the products.
Surface quality affected: In some cases, gas or volatile substances may cause defects on the surface.
Product quality fluctuation: Inadequate gas expulsion may lead to instability in the production process and product quality.
Processing process disturbed: Different materials and processing conditions may affect the extrusion process due to gases and volatile substances.
Therefore, for specific materials and production processes, setting up an appropriate degassing step can help improve the gas expulsion situation during the processing.
III. What role does the vacuum pump play in the plastic extrusion production line?
In the vacuum degassing system, the vacuum pump is required to remove gases according to the production process and meet the requirements of the system for gas extraction capacity and working pressure.
In practical applications, the selection of the vacuum pump usually needs to consider the following aspects:
01 Does the gas extraction capacity meet the production requirements?
Different extrusion equipment, different materials, and different production speeds may have different requirements for gas extraction capacity.
If the gas extraction capacity does not match the actual working conditions, it may affect the ability of the system to maintain the required vacuum environment. Therefore, it is necessary to evaluate based on the exhaust capacity of the equipment, process pressure, and production conditions.
02 Gas composition and working environment
The gases extracted during plastic extrusion may contain water vapor, volatile substances, or other process components.
When selecting the vacuum pump, it is necessary to understand the actual gas composition, temperature, and possible pollutants, and assess the applicability and supporting requirements of the equipment.
03 Whether the equipment is suitable for continuous operation
Plastic extrusion production usually has the characteristic of continuous processing, and the vacuum equipment also needs to be matched with the operation mode of the production line.
When selecting the equipment, it is necessary to comprehensively consider the operating time of the equipment, maintenance requirements, pipeline configuration, and system stability, and avoid choosing the equipment based on a single parameter.
IV. What plastic processing scenarios can dry screw vacuum pumps be applied to?
Dry screw vacuum pumps can be used in some industrial vacuum processes that require oil-free operation. In the field of plastic processing, their application can be evaluated based on actual conditions in the following scenarios:
Vacuum degassing in plastic extrusion production lines
Vacuum pumping during plastic modification and granulation processes
Vacuum processes related to recycled plastic processing
Vacuum exhaust in high-molecular-material processing
Support for plastic sheeting and related molding equipment
For different materials and production processes, equipment selection needs to be confirmed by considering factors such as gas composition, pumping load, working temperature, and target pressure.


V. Screw-Rotary Vacuum System, Meeting Different Vacuum Requirements
In some industrial vacuum applications, a single vacuum pump may not be able to simultaneously meet the process requirements for vacuum capacity and working pressure range.
At this point, a screw-Rotary vacuum system can be considered based on the process conditions. The system is usually composed of a dry screw vacuum pump and a Rotating Vane Vacuum Pump, and through the collaborative work of different pump types, it can meet the vacuum requirements under specific conditions.
In plastic extrusion and related industrial vacuum applications, whether to adopt a screw-Rotary system should be evaluated based on the vacuum load of the production line, target pressure, operation mode, and equipment configuration.
A reasonable system design also needs to consider piping, valves, filtration devices, control methods, and maintenance requirements, so as to match the vacuum equipment with the production process.


During the plastic extrusion and related processing, vacuum degassing is one of the important factors affecting the process performance. By properly configuring vacuum equipment, a necessary vacuum environment can be provided for gas discharge.
Italvac Technology (Dongguan) Co., Ltd. specializes in vacuum pumps and related equipment. Based on different industrial application requirements, it can offer product consultation and selection support for dry screw vacuum pumps, multi-stage rotary vane vacuum pumps, and screw-rotary vane vacuum systems, etc.
If you are planning to install plastic extrusion, modification granulation, or related vacuum degassing equipment, please feel free to communicate with Italvac about specific working conditions and jointly explore suitable vacuum solutions for your production needs.
This website uses cookies to ensure you get the best experience on our website.